Bed Bugs Online Store
Bed Bug Monitors & Traps
CLIMBUP™ insect interceptors are part of our bed bug treatment protocol for use during an infestation. They monitor for bed bugs allowing the user to know not only if they have bed bugs, but also how bad the infestation is and when they are finally gone. They are designed to intercept bugs leaving the bed or attempting to enter. Climbup Interceptors are easy to apply and should be re-applied with talc powder every few weeks using a small cotton ball. Talc can be purchased for a few dollars at any CVS or Walgreens. Remember that every bug that is intercepted by the climbup interceptor is one less bug that can reproduce or feed on a sleeping person. In order for these devices to work to their optimum potential, what must I do? 1. Do not let any items (i.e. comforters, sheets, clothes, etcÖ) hang off of the bed and touch the floor at any point during the day or night. 2. Do not allow the bed to contact the wall. 3. Check the devices periodically to evaluate if bugs are present or if the devices are compromised (broken, debris in the wells) in any way. This situation will not allow the CLIMBUP™ to work properly. This situation will optimize the CLIMBUP™ effectiveness.
The Trapper Monitor and Insect Trap - TM2600 is a non-poisonous glue trap that captures and monitors insects. Pest control professionals use these traps to accurately determine the location, species and severity of insect infestations. The sturdy 7" x 3.5" cardboard trap can be used individually as a large trap (100 per box) or separated along perforated lines into three smaller traps (making 300 total small traps). The traps contain an adhesive backing which allows them to be stuck to almost any surface. There is a space to record the date and location of use. Listing is for Case of 100 Boards which can be torn into 300 smaller monitor traps.
New and improved thicker polypro design to resist cracking." Climbup Insect Interceptors are a unique and easy-to-use monitoring system to aid in the early detection of bed bug infestations. These specially designed plastic cups are pesticide-free and are too slick for the bugs to crawl out. Talc powder is optional for best results, but is not required and not included. Bugs approaching the bed (or other furniture) from the floor will fall into the outer well while bed bugs leaving the bed will get stuck in the center well. Allows early detection for bed bugs and also aids in protecting furniture from reinfestation.
These bed bug monitors should be centered under each leg of the bed or furniture remaining in place for a minimum of 30 to 60 days to assist in monitoring for bed bugs; it is recommended that you keep them in use indefinitely for continuous bed bug monitoring.
New and improved thicker polypro design to resist cracking. Climbup Insect Interceptors are a unique and easy-to-use monitoring system to aid in the early detection of bed bug infestations. These specially designed plastic cups are pesticide-free and are coated with a thin layer of talc which makes them too slick for the bugs to crawl out. Bugs approaching the bed (or other furniture) from the floor will fall into the outer well while bed bugs leaving the bed will get stuck in the center well. Allows early detection for bed bugs and also aids in protecting furniture from reinfestation. Exterior dimensions: 8 x 10 inches.
No matter where your pest problem rears its ugly head, Hot Shot insecticides are the answer to what’s Bugging you! Hot Shot insecticides offer a Complete lineup of indoor & outdoor solutions to keep unwanted pests out of your home, & out of your life. The Hot Shot bed bug interceptor provides an easy way to detect the presence of bed bugs. These reusable, ready-to-use detectors Monitor for bed bugs where they live & travel. They work best when placed in areas of known bed bug activity & harborage, such as under furniture & bed frame legs, & along the wall. The Hot Shot bed bug interceptor also has a non-skid design that will keep furniture from sliding. These pesticide-free interceptors help detect bed bugs & alert the need to begin the treatment process. In addition to placing under furniture legs, recommended placement is every 5' along the wall of sleeping areas.
TRAPPER MONITOR & INSECT TRAP is a non-poisonous glue trap that captures and monitors insects. PCOs can use it to accurately determine the location, insect species and severity of insect infestations. The sturdy 7 inch x 3 inch cardboard trap can be used undivided as a large trap or separated along perforated lines into three smaller traps. Its adhesive backing sticks to nearly any surface. There is space to record date and location of use. TRAPPER MONITOR can utilize Bell is new TRAPPER Roach Attractant Tablets. These non-poisonous tablets attract roaches to each glue pad. Tablets are sold separately.
Bed bugs are attracted to porous materials with many crevices where they can hide. The textured base of the Disposable Detection Trap allows bed bugs to easily climb up into the trap, attempting to find a hiding spot, where they become trapped on the glue strip. Place between your box spring and mattress, seat cushions or on the ground near your bed for effective bed bug monitoring and trapping.
Bug infestations are most commonly found in mattresses, box springs, and floorboards. The Detector is the only trap in the market engineered to determine where the bed bugs are coming from and stop them from climbing back up furniture posts. Save time and energy by correctly identifying the source of the infestation prior to targeted treatments. Engineered to intercept and trap bed bugs before they reach your bed. Detect early infestations. Monitor the efficacy of treatments.
The Night Stick was developed to address the increasing worldwide problem of bed bug infestation. It has become the most cost-effective method on the market for early detection against this growing epidemic. The Night Stick allows you to sleep comfortably knowing that bed bugs will be detected and trapped before reaching your bed. Early detection is critical in identifying bed bug activity and essential to preventing a possible infestation before it starts. The Night Stick package includes (4) inserts that install easily and discreetly in the 4 corners on all bed styles. The Night Stick was designed to do its best at providing multiple harborage sites. The top edge, as well as the grooved surface is designed as harborage points without the use of glue. Also, scattered among the grooved surface is a maze of glue filled holes, providing an increased opportunity to capture the bed bug as it tries to navigate throughout the maze of sticky, perforated craters. The Night Stick's specialized non-toxic, pesticide free formula and design is intended to lure bedbugs & other insects into the trap for detection! No returns on opened, used or damaged products. Exchanges only.
These traps work overnight to detect and monitor all stages of bed bugs. The traps have a CO² lure, a heat source and a pheromone lure; essentially they mimic a person and attract bed bugs into the trap. Bed bugs are invasive and are being found any place that people go; hotels, houses, apartments, condominiums, airplanes and even department stores and libraries. Use these traps to check for them overnight, and keep your peace of mind.
"New and improved thicker polypro design to resist cracking." Climb up insect interceptors are a unique and easy-to-use monitoring system to aid in the early detection of bed bug infestations. These specially designed plastic cups are pesticide-free and are too slick for the bugs to crawl out. Talc powder is optional for best results, but is not required and not included. Bugs approaching the bed (or other furniture) from the floor will fall into the outer well while bed bugs leaving the bed will get stuck in the center well. Allows early detection for bed bugs and also AIDS in protecting furniture from reinfestation. (Box of 4 interceptors).
Glue trap that uses both heat and CO2 to attract bedbugs. This trap is easy to deploy, easy to transport and a simple way to monitor the rooms where you're staying to see if they have a bed bug problem. Bring some with you when on vacation or staying at someones house that might have a bed bug infestation. These traps use no chemicals and are safe for use around people and pets.
4 pc BEDBUG Monitor DETECTION SYSTEM Non-Toxic Slide Under Mattress Bedding Dorm Homes Apartments Hotel Motel Office Lockers Luggage Travel SCHOOL
This Bed Bug Slider is designed to catch bed bugs at the first sight if infestation. It is textured and shaped specifically to attract bedbugs and insects, When placed in areas where bed bugs are commonly fould they explore and once in they stick to the Catchmaster adhesive and become trapped. Detect bed bugs before it's too late! Dimensions: 2.75 x 2 x 0.625″
Trapper Insect Trap (Great for Bed Bugs, Spiders, Cockroaches) - 10 Large Boards or can be used as 30 Smaller Traps/ Monitors
When trying to control spiders in your home place these small traps in any of the areas, like under beds, behind sofas, and other areas you can get your spider problem under control. Also if you catch a few insects on the glue board these will attract some of your hunting spiders while they are trying to get off the glue board, they become spider bait.
Hot shot bed bug glue traps provide an early warning of bed bug infestations & alert you to the need to begin treatment. Place anywhere bed bugs can hide & the powerful glue traps prevent them from crawling & hiding so you can see easily see if bed bugs are present. Treatment at the first sign of bed bugs can prevent severe infestations. Traps do not contain a killing agent.
2 Pack, Bed Bug Alert, Ideal Way To Check and Verify If You Have Bed Bugs, Bed Bugs Are Hard To Detect, Our Clear, Safe, Rigid Plastic Monitoring Device Slips Between Mattress and Frame, Special Gel Attracts and Traps Bed Bugs Alerting You If They Are Present. Ideal For Use When Traveling In Hotels, Luggage and Briefcases, Typically Lasts 3 Weeks, But Can Be Less In Dry Climates.
Safety, Simplicity, 100% effectiveness. Heat is recognized as the ultimate solution for bed bug eradication. Heat can penetrate into hiding places that cannot be visually inspected or reached by chemicals. Industry research shows that lethal temperatures for killing bed bugs and eggs requires exposure to temperatures ranging from 117°F to 122°F. The walls and floor of the Expedition System can safely heat up to 160°F to surround the contents with uniform heat to permeate the core, yet is safe to touch and won't damage the contents. 5-Surface Heating For Uniform Heat The Expedition is constructed with a UL recognized thin heating film which evenly distributes the heat around the walls of the box. This ensures that there are not excessive hot spots that could damage the contents, or cold spots allowing the bugs to hide. Just drop in a full bag and go. The ease of loading makes it perfect for treating even cluttered situations. No rearranging the contents to ensure air flow, unlike single source heating systems. The Expedition can heat treat a wide variety of items that are often difficult or expensive to treat by other means - including shoes, dry clean items, blankets, even full bags of clothing. The Gatekeeper In Bed Bug Prevention The Expedition works great as first line prevention, providing peace of mind to families and business travelers that don't want to bring home unwanted pests. ThermalStrike Expedition Systems are also used by charities to treat incoming donations, schools, universities, and retail locations. Additional Features: • Easy to set up, reusable and collapsible for easy storage • Dual safety circuits to protect your home, suitcase, and garment • Treatment generally 8 hours or less